Influence of size and taper of artificial canals on the trajectory of NiTi rotary instruments in cyclic fatigue studies
Received 27 June 2009; received in revised form 3 August 2009; accepted 5 August 2009. published online 18 November 2009.
Objective
The aim of this study was to investigate the influence of the shape of 3 different artificial canals on the trajectory followed by different nickel-titanium rotary instruments.
Study design
Ten ProFile and Mtwo instruments, tip sizes 20 and 25, taper .06, were tested in 3 simulated root canals with an angle of curvature of 60° and radius of curvature of 5 mm but with different shapes. Geometric analysis of the trajectory that each instrument followed inside the 3 different artificial canals was performed on digital images, determining 3 parameters: angle and radius of the curvature and the position of the center of the curvature. Mean values were then calculated for each instrument size in all of the artificial canals. Data were analysed using 1-way analysis of variance, Holm t test, and Student t test to determine any statistical difference (P < .05).
Results
In all instrument sizes, a statistically significant difference was noted among the artificial canals for the radius and angle of curvature. No statistically significant difference was noted between instruments of the same size for the radius and angle of curvature and the position of the center of the curve when measured in the canal constructed on the dimension of the instruments.
Conclusions
Different instruments follow different trajectories in artificial canals constructed with the same parameters of curvature but different shapes, depending on their different bending properties. All of the instruments respected the established parameters of curvature only when the artificial canal is designed on the dimension of the instruments.
aDepartment of Endodontics, University “La Sapienza, Rome, Italy”
bDepartment of Endodontics, Catholic University of the Sacred Heart, Rome, Italy
cDepartment of Restorative Dentistry and Endodontics, School of Dentistry, University of Belgrade, Serbia
Reprint requests: Dr. Gianluca Plotino, Via Eleonora Duse 22, 00197 Rome, Italy
ABSTRACT